Owners of turbocharged models should pay more attention to hot cars As an emerging engine technology, the maintenance and use of turbocharged engines place higher demands on car owners. Unlike a naturally aspirated engine, the main shaft of a turbocharged engine adopts a floating design. The turbine... read more
High temperature is the big killer of turbochargers The turbocharger has a simple structure, does not consume the power of the engine itself, and has a high boost value. These factors lead to a powerful advantage of turbocharging. However, the principle of turbocharging makes it have a big hi... read more
The flange electric ball valve is an electric automatic control valve composed of a quarter-stroke electric actuator and a flange ball valve. It is usually used for remote opening and closing (connecting and cutting off the medium) of the pipeline medium and the control of the flow rate. Flange elec... read more
1. Installation of electric actuator motor 1. Install the motor, first install the motor in the coil, rotate the motor, and check whether the motor selection is easy. 2. Install the motor to fix the baffle. The gap is relatively small. Special tools are required to knock the baffle in evenly.... read more
Pneumatic actuators are actuators that use air pressure to drive opening and closing or adjusting valves. They are also called pneumatic actuators or pneumatic devices. They are generally called pneumatic heads. Pneumatic actuators have two strokes, one is 0-90° stroke for use with butterfly ... read more